Prices for lighting kits and power adaptors include post within Australia.
If for any reason you have trouble ordering, please get intouch via email on the contact page. There have been occasional issues with links to Paypal, so please be patient and we'll sort it out. Thanks.
UFO 650
UFO 650 fits Dillon XL 650 & XL750
- 24 SMD 2835 LEDs
- High Strength 3M 300LSE Adhesive
- Installation Hardware
- Detailed Instructions
- Lifetime Warranty*
- 12v Australian Power adaptor available separately
UFO 550
UFO 550 fits Dillon 450 & 550
- 21 SMD 2835 LEDs
- High Strength 3M 300LSE Adhesive
- Installation Hardware
- Detailed Instructions
- Lifetime Warranty*
- 12v Australian Power adaptor available separately
UFO
UFO fits Hornady LnL AP (6in) Single Stage Press (3.75in)
- 27 SMD 2835 LEDs
- High Strength 3M 300LSE Adhesive
- Installation Hardware
- Detailed Instructions
- Lifetime Warranty*
- 12v Australian Power adaptor available separately
UFO BL
UFO BL fits Lee Breech Lock Pro/Pro 4000
- 12 SMD 2835 LEDs
- High Strength 3M 300LSE Adhesive
- Installation Hardware
- Detailed Instructions
- Lifetime Warranty*
- 12v Australian Power adaptor available separately
UFO CX
UFO CX fits Forster Co-Ax (see note), TUBAN PRAZIPRESS
- 12 SMD 2835 LEDs
- High Strength 3M 300LSE Adhesive
- Installation Hardware
- Detailed Instructions
- Lifetime Warranty*
- 12v Australian Power adaptor available separately
Please note: Advice from a customer says that if you are using the Quick Change jaws, the screws that hold the jaws together will interfere with one LED on either end of the strip.
The simple solution is to slightly countersink the screw heads, which can be done in a few minutes. (See last photo for reference).
Thanks to Glen in New Zealand for the tip.
UFO LM
UFO LM fits Lee LoadMaster
- 21 SMD 2835 LEDs
- High Strength 3M 300LSE Adhesive
- Installation Hardware
- Detailed Instructions
- Lifetime Warranty*
- 12v Australian Power adaptor available separately
UFO LT
UFO LT fits Lee Turret Presses
- 18 SMD 2835 LEDs
- Installation Hardware
- Detailed Instructions
- Lifetime Warranty*
- 12v Australian Power adaptor available separately
UFO RC
UFO RC fits RCBS Pro Chucker 5 & 7
- 18 SMD 2835 LEDs
- High Strength 3M 300LSE Adhesive
- Installation Hardware
- Detailed Instructions
- Lifetime Warranty*
- 12v Australian Power adaptor available separately
Power Adapter
Australian compatible power adapter for use with the KMS Squared lighting kits.
This power adaptor does not have the in-line on/off switch as the US supplied ones do. The reason being is that US power points do not have an on/off switch, while Australian power points do, so there is no need for an extra switch on the adaptor.
Splitter cable.
Splitter cable. 20cm long.
To run lights to two presses with one power adaptor.
Extension Cable
Extension cable. 5m long.
Handy if you don't have a power point near your work area.
Dillon 550 - Dillon 450 & 550 All versions
Dillon 650 - Dillon XL650 & XL750. Can be adapted to RCBS Pro 2000
UFO LM Lee Loadmaster. Can be adapted to Spolar Gold Premier, RCBS Grand and RCBS Auto 4x4.
UFO LT - Lee Pro 1000, Classic 4 station turret. Can be adapted to Breech Lock Pro, MEC 600 JR Mk5 and RCBS Pro Chucker 7
UFO CX - Forster Co-Ax. Can be adapted to Turban Prazipress.
UFO M2 - MEC Marksman, Hornady Iron.
UFO SP - Lee Six Pack/Pro 6000
Universal - Will fit most press models as long as clearance is available.
Customer Comments:
Stephen in QLD... "Received the message that Australia Post had delivered my press lights. I couldn't wait to get home this evening. Unpacked and tested as I came through the front door. Very happy!"
"Thanks for handling this whole transaction so professionally. I will spread the word in the shooting clubs I go to regularly."
Stephen is the owner and website creator of https://acas.today the Australian Cowboy Action Shooting website. Checkout his website if you're into Cowboy Action Shooting.
Glen in NZ... "LEDs in and running. Very nice. When I turn them off, the inside of my press resembles the inside of a cave. Very happy with the result. The Co-Ax is a bit closed in and really benefits from the lighting."
James... "Mark - arrived last night. Fitted it up and it works very well. Brilliant! (pun intended)."
Roy... "Thank you for getting the light setup to me so quickly. Got it setup on the XL750 over the weekend, absolutely love it. Definately beats the LED booklight. Really happy with it mate, thanks again."
Skip... "Works GREAT. Here are a couple of pics. It is incredible just how much better everything is under these lights.
I thought my presses were well lit before, but I was wrong! Thanks again for your help."
David... "Hi, installed yesterday afternoon very easily, and the brightness level is excellent.
Would recommend them to anybody with a reloading press."
